If you need to calibrate your ecg amplifier, this ecg calibrator device is able to generate known signals in place of your animal. It is especially suited for:

• ecg and long-term ecg equipment
• validation of software acquisition
• validation of software analyser

ecg calibrator provides six leads and one precordial.

Up to 9 different signals can be recorded in memory (Sinus wave form, ecg wave form, different amplitudes or frequency …).

ecg calibrator is the best way to validate your complete acquisition setup.

Technical specifications:

leads	RA, LA, LA, LL, P, RL
connections - electrode markings	Five 4-mm banana sockets, snaps for brackets or clip According to DIN IEC 62D(CO)6 CODE1 + color code BNC output with the recorded signal
program selection	Up to 9 recorded signal and for each one, obtain 6 leads and precordial with these formulas :
signal amplitude, signal bandwidth	up to - 5v to 5v , 0 to 500 Hz
sampling rate, amplitude resolution	1000 Hz, 8 bits
impedance	approx. 20 ohms
battery, length of operation	standard, 2, 1.5-volt, LR6, Approx. 100 hours of constant operation
environmental conditions	operating temperature: 0 to 40° C storage temperature: -20 to 80 °C rel. air humidity: 10 to 90%, non condensing barometric air pressure: 700 to 1500 hPa
dimensions, weight, conformity	LxWxH: 155 x 95 x 35 mm, 310 g including batteries, CE mark