single channel stimulator:

Constant current stimulator with output insulation and maximum power of 40 mA/50 V (2 W). Produces single or dual pulses. In dual pulse mode, the second pulse has the same electrical characteristics as the first pulse:

operating modes:

The stimulator can be triggered manually to deliver

• one isolated pulse or a sequence of two isolated pulses
• a train of single or dual pulses of programmable duration

technical data:

• Pulse width: from 1 to 10 ms
• Pulse frequency: from 0.1 to 100 Hz in 3 ranges: (0.1 to 1 Hz), (1 to 10 Hz), (10 to 100 Hz)
• Pulse shape: positive square or negative square through polarity inversion
• Delay between first and second pulse: from 0.01 to 10 s in 3 ranges: (0.01 to 0.1 s), (0.1 to 1 s), (1 to 10 s)
• Pulse train duration: from 0.01 to 100 s in 4 ranges: (0.01 to 0.1 s), (0.1 to 1 s), (1 to 10 s), (10 to 100 s)
• Oscilloscope synchronization delay: from 5 µs to 0.5 ms in 2 ranges: (5 to 50 µs), (50 µs to 0.5 ms)

operating controls:

front panel settings are:

• Operating mode (train of pulses, continuous pulse, isolated single or dual pulse)
• Oscilloscope synchronization delay
• Pulse train mode and pulse width
• Second pulse delay
• Frequency
• Polarity inversion
• Power
• Manual trigger

coupling to other equipment
This stimulator can be triggered by an external control box or by iox2 software. It also can drive the 8-channel stc8808 stimulator.

The signal from the stimulator can be amplified up to 800 mA/80 V using the 1-channel stc4050 amplifier or the 2-channel sta2808 amplifier (in this latter case, both channels are synchronized).

Dimensions: 150 x 260 x 280 mm (HxWxD).
Weight: 2.8 kg.